Home > RC DRONES > FPV RACING DRONE

21g Eachine AE65 7 Anniversary Limited Edition 65mm 1S Tiny Whoop FPV Racing Drone BNF CADDX ANT Lite Cam 5A ESC NX0802 22000KV Motor - Compatible Flysky Receiver

0.0 (Reviews 0)
US$105.00 US$105.00
US$105.00 US$105.00

Buy at

Banggood

Eachine AE65 7 Anniversary Limited Edition comes with the most valuable 1s 65mm brushless whoop in 2020. Smooth and durable. Come with High performance Caddx FPV Ant lite camera and New ET2.0 plug. The weight only 21g. Simply bind it to your transmitter then you are ready to enjoy it.

 

Specifications:

Brand Name: Eachine
Item Name: AE65 7 Anniversary Limited Edition (ONLY 500PCS)

Wheelbase: 65mm
Size: 81mmx81mmx39mm
Weight: 21g(without battery)

 

Features:

1s 65mm brushless whoop Eachine Limited Edition

21gram 1s brushless 65mm whoop

New AIO 4in1 CrazybeeX flight controller

Smooth and powerful

CADDX ANT Lite Camera

High performance ET2.0 plug

Advantage compared to the PH2.0
★Solve the voltage sag problem
★15A continuous current, 20A burst
★1.0mm gilde banana connector decreased internal resistance

 

Receiver option:

Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)

Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)

External Frsky RXSR receiver version(ACCST D16 sbus output)

External TBS Crossfire Nano receiver version

 

Flight controller

(Frsky SPI RX version) CRAZYBEEX FR V1.0 FC  Firmware target: CrazybeeF4FR

(Flysky SPI RX version) CRAZYBEEX FS V1.0 FC Firmware target: CrazybeeF4FS

(External Frsky RXSR version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX

(External TBS CRSF NANO version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver or no receiver
Built-in 5V 1A BEC
Built-in voltage detection

Motor

Mode: NX0802 22000KV
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g): 1.7g
No.of Cells(Lipo): 1S only

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1-2S LiPo/LiPo HV

Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Default protocol: DSHOT600

Propellers

Gemfan 1219-3

Center Thickness:5mm

Prop Disk Diameter:31mm

Center Hole Inner diameter:1.0mm

Onboard 5.8g VTX

Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 

Smartaudio ready

Caddx ANT Lite Camera

Image Sensor 1/3" CMOS Sensor

Horizontal Resolution 1200 TVL

TV System NTSC/PAL switchable

MENU SUPPORT

IMAGE 16:9

Synchronization Internal

Electronic Shutter PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio >52dB (AGC OFF)

Video Output CVBS

Lens 2.1mm

Min. Illumination [email protected]

Auto Gain Control YES

BLC YES

WDR Global WDR

DNR 2 DNR

Dimensions 14mm*14mm

Wide Power Input DC 3.7-18V

Work Temperature -20℃~+60℃

Work Humidity 20%~80%

Weight 1.5g (N.W.)

Lipo Battery

Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 55mmx12mmx7mm
Weight: 6.5g

Connector: ET2.0

Multi port Lipo/Lihv battery charger

Weight: 41g
Dimensions: 82x51x22mm
Input: DC 7V-22V
Output switchable: Fixed at 200~600 milliamps
Cutoff voltage switchable:
4.20v cell charging cutoff (+- 0.5% margin of error) for 1S Lipo Battery
4.35v cell charging cutoff (+- 0.5% margin of error) for 1S 3.8V LIHV Battery

Onboard Frsky SPI D8 Receiver Version

SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model

Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard Flysky SPI Receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support

External Frsky R-XSR receiver version

Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)

Operating Voltage Range: 3.5V~10V

Operating Current:[email protected]

Firmware Upgradable

Compatibility: FrSky X Series modules and radios in D16 mode 

Could support Frsky New ACCESS Protocol ( Upgrade firmware)

Weight: 1.5g

External TBS CRSF Nano receiver version

Original TBS CROSSFIRE Receiver  ,CRSF Protocol , Official TBS transmitter compatible

 

 

Package Included:

1 x AE65 Frame and Canopy

1 x Receiver

Option1: CrazybeeX FR V1.0 built-in internal Frsky SPI D8 receiver

Option2: CrazybeeX FS V1.0 built-in internal Flysky SPI receiver

Option3:CrazybeeX PNP V1.0 with External Frsky RXSR receiver

Option4:CrazybeeX PNP V1.0 with External TBS crossfire nano receiver

4 x Eachine NX0802 KV22000 Brushless Motor

1 x Gemfan 1219-3 Propellers(4cw+4ccw)

1 x Caddx Ant Lite Ultra Light Nano FPV Camera

1 x 5.8G 25mw 40ch VTX (Flight Controller built-in) 

4 x 1S 250mah 30C LiHV Battery

1 x Multi Port LIPO/LIHV Battery Charger with 12V Adapter

1 x Screw Driver

1 x Propeller Disassemble Tool

1 x Eachine Handbag

Wholesale

Wholesale Inquiry

CUSTOMER REVIEWS

Average rating:
0.0 / 5.0
WRITE A REVIEW

There are no reviews yet!

RELATED PRODUCTS

WRITE A REVIEW

Rating:
Review Title * 0 /100

The review title can not be empty!

Review Content * 0 /800

The review content can not be empty!

Add Photo

    Max 2 images, 2MB per image, Format: jpeg/jpg/gif/png/bmp

    Add Video

    Share a video with your review, please make sure your video is related to the product

    SUBMIT REVIEWS

    Your review is submitted successfully!

    We will process your review within 1-5 business days.

    Please enter your inquiry information

    • *
    • *
    • 0 / 300
    • Please enter your contact information
    • *
    • *
    • Submit

    Reminder

    OK