Home > RC PARTS > MOTOR

Eachine Cinefun Spare Part CRAZYBEEX FR V2.2 F4 OSD 1S Flight Controller AIO 5A ESC 5.8G 40CH 25/200mW VTX and Receiver for Whoop RC Drone FPV Racing - Compatible Frsky Receiver

0.0 (Reviews 0)
US$57.99 US$57.99
US$57.99 US$57.99

Buy at

Banggood

Specification:

Brand Name: Eachine

Model: CRAZYBEEX FR V2.2

Item Name: F4 1S FC AIO ESC VTX & Receiver

Input Voltage: 1S Lipo 

Size: 28.5x28.5mm

Mounting Hole: 25.5x25.5mm

Weight: 4.4g

Application: Original Replace Part for Eachine Cinefun 1S FPV Racing Drone

 

F4 OSD Flight Controller (Frsky SPI RX version) CRAZYBEEX FR V2.2 FC  Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEEX FS V2.2 FC Firmware target: CrazybeeF4FS
(External TBS CRSF NANO version) CRAZYBEEX PNP V2.2 Firmware target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver or no receiver
Built-in 5V 1A BEC
Onboard 5A 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV 
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_8.HEX
Default protocol: DSHOT600
Onboard 5.8G 40CH 25/200mW VTX

Output power: 25mw~200mw switchable
Frequency: 40CH

Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 
Smartaudio ready

Default vtx_power is 3
Should set vtx_low_power_disarm = ON to reduce the high temperature when test on the ground

Onboard Voltage and Current detector

Voltage Meter scale:  110
Amperage Mete scale: 1175

Onboard Receiver ( Optional)

Compatible Frsky Receiver Version

SPI BUS receiver Frsky D8 compatible

Compatible Non EU transmitter D8 model
Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard Receiver ( Optional)

Compatible Flysky Receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m
Failsafe support

 

CrazybeeX FR V2.2 Bind procedure:

  1. Make the on board receiver get into bind mode: Plug USB and then press the bind button for 1 second,  the Red LED on the top of the flight controller will getting to be solid , this indicate the receiver is in bind mode;

Or use bind code to bind :For 3.5.7 version firmware Plug USB and then connect Betaflight configurator and then move to CLI tab , type “Frsky_bind”, the Red LED on the top of the flight controller will getting to be solid , the onboard receiver is in bind mode;

  For 4.0.x the bind code is “bind_rx_spi” ,For 4.1.x or 4.2.x the bind code is “bind_rx”

 

  1. Make your Frsky transmitter get into bind mode . If bind is successful the red led will starting to blink.   

The red LED wouldn’t blinking when binding with some new ACCESS firmware frsky radio,  but the bind is actually successful ,

need to go to CLI command and type “save” to finish the binding .

 

Package Included:

1x F4 AIO Board

4x Anti-vibration Ball

1x bag of Screws

Wholesale

Wholesale Inquiry

CUSTOMER REVIEWS

Average rating:
0.0 / 5.0
WRITE A REVIEW

There are no reviews yet!

RELATED PRODUCTS

WRITE A REVIEW

Rating:
Review Title * 0 /100

The review title can not be empty!

Review Content * 0 /800

The review content can not be empty!

Add Photo

    Max 2 images, 2MB per image, Format: jpeg/jpg/gif/png/bmp

    Add Video

    Share a video with your review, please make sure your video is related to the product

    SUBMIT REVIEWS

    Your review is submitted successfully!

    We will process your review within 1-5 business days.

    Please enter your inquiry information

    • *
    • *
    • 0 / 300
    • Please enter your contact information
    • *
    • *
    • Submit

    Reminder

    OK