US$49.99
US$69.99
Buy at
BanggoodEachine E010S 65mm Micro FPV Racing Quadcopter with 800TVL CMOS Based On F3 Brush Flight Controller
US$49.99
US$69.99
Where to buy? find more retailer
- Product Description
| Decription: | |||
| Item NO: | E010S | ||
| Battery Power: | 3.7V 45C 150 MAH | ||
| Wheelbase: | 65mm | ||
| Frame: | ABS high-quality | ||
| 615 Coreless Motor: | Long diameter (without motor axis): |
15mm | |
| Wide diameter: | 6mm | ||
| Weight: | 4.8 g | ||
| Speed: | 59000 rpm ± 12% | ||
| F3 Brush Flight Controller: (the version can be selected) |
F3+FRSKY |
- F3 is an open source flight control to support the current international mainstream Cleanflight and Baseflight platform
- Integrated FRSKY compatible 8CH receiver, serial output
- Support FRSKY communication protocol, 8 channels
- Built-in DC-DC boost circuit, can be powered by IIC and UART interface other devices, support 1S lithium battery
- Drive motor frequency: 2K (this frequency can be set by the user, the maximum frequency can be set to 32K)
- Gyro support manual mode, horizontal mode
- Firmware upgrades and tunables can be done via Micro USB.Adjust the interface with Baseflight Configuration and Cleanflight-Configuration |
|
| F3+FLYSKY | |||
| F3+DSM | |||
| 800TVL 40CH 25MW VTX 1/3 "CMOS FPV Camera | ||
| Camera: | Sensor: | 1/3 "CMOS |
| Clarity: | M7 800TVL camera | |
| View Angle: | 150° FOV horizontal view angle 170° DFOV opposite view angle |
|
| Signal system: | NTSC/PAL (one-button switch) | |
| Power consumption: | [email protected] | |
| Operating voltage: | 3.6-5.5V | |
| Lens mirror diameter: | 2.1mm IR coated FOV150(Level) | |
| Transmitter: | Supporting video system: | NTSC/PAL |
| Output impedance: | 75 Ohm | |
| Operating signal intensity: | 23~24dBm | |
| Output power: | 25mW | |
| Wireless channel: | 40CH | |
| Operating voltage: | 3.6V~5.5V | |
| Current: | 100mA | |
| Sound carrier: | 6.5MHz | |
| Transmit Frequency Table: | Band A : | 5865,5845,5825,5805,5785,5765,5745,5725 |
| Band B : | 5733,5752,5771,5790,5809,5828,5847,5866 | |
| Band E : | 5705,5685,5665,5645,5885,5905,5925,5945 | |
| Band F : | 5740,5760,5780,5800,5820,5840,5860,5880 | |
| Band R : | 5658,5695,5732,5769,5806,5843,5880,5917 | |
| Weight: | 3.8g | |
| Size: | 26x20x18mm (without antenna) | |
| Function: | - Camerapicture comparable to CCD | |
| - True wideangle lens 150° FOV Horizontal viewing angle 170° DFOV diagonal viewing angle | ||
| - Ultra-low power, ultra-lightweight, extremely suitable for smaller aircraft | ||
| - Turn to the R channel,ABEF 4 indicator lights bright,can choose1.2.3.4.5.6.7.8 | ||
Features:
1. Without assembly and commissioning
2. Open - source flight control can be adjusted according to the player 's personal preferences self - stability, semi - self - stability, manual, convenient for different levels of players
3. According to the race standard RaceBand VTX CAM 40 channel transmitter,Cmos 1/3 800Tvl high-definition camera,NTSC / PAL system can be a key switch
Package included:
1x Frame kit
4x 615 59000 rpm ± 12% Coreless Motor
8x Blades(2 Sets )
1x F3_EVO_Brush Flight Controller
1x 800Tvl 40cH 25mW Camera
1x 3.7V 45C 150MAH battery
1x USB Charger
1x Manual
1x Blade removal tool
Downloads
FAQ
- How to bind the drone to my DX9
- 1. You need to do it in Cleanflight. 2. Open the Cleanflighton your PC, connect the quead with USB cable, go to Controller (or Transmitter) tab. 3. Start the binding procedure on your transmitter and it should bind automatically. Hold binding button for a few seconds. When it is bound, the blue light should be solid (not flashing).
- Is it compatable with my flysky fsi6?
- Yes, you need chose Flysky Version.
CUSTOMER REVIEWS
Average rating:
5.0
/ 5.0
WRITE A REVIEW
-
5.0By Сергей Захаров2017-03-13
Awesome!
It's the best from all of my micro fpv quads!
-
RELATED PRODUCTS
-
$23.99 $23.99 -
$42.99 $42.99 -
$119.99 $169.99 -
$49.99 $49.99
WRITE A REVIEW
Your review is submitted successfully!
We will process your review within 1-5 business days.