Specifications:
Brand:Eachine
Name:EM3 Horizontal Gasoline Engine Model Stirling Water-cooled Cooling Structure
Size:127*78*65MM
Displacement: 1. 6CC.
Cylinder diameter: 13MM
Itinerary: 12MM.
Weight: 1100G
This is a micro engine. It is made of brass and stainless steel. Water cooling structure. The bore is 13MM. The stroke is 12MM. The ignition device is powered by a 4.5V power supply.
It can be activated in two ways: external force (electric drill)
Features:
Engine startup steps
1. Check the wiring of the engine from the bottom plate, install three AAbatteries(4. 5V). Add water to the water tank.
2. Unscrew the fuel tank screw at the tail. Fill the fuel tank with gasoline(95#). When the filling is completed, press the carburetor port by hand onthe right side of the engine, and turn the flywheel counterclockwise formany times. Make the mixed fuel fully enter the fuel pipe.
3. Turn on the power switch and quickly turn the flywheel clockwise andcounterclockwise on the right side of the engine to start the engine.
Precautions
1. When the ignition device is normal and the cylindercompression is normal, if the machine cannot start normally, it isvery likely that the carburetor oil needle needs to be adjusted1/4 turn and start the flywheel, so that the mixing ratio roosen.
2. After tightening the main oil needle on the carburetor, Igasoline and air can reach the normal working mixing ratio afterseveral times.
3. When the machine stops, the power switch should be turned off.
Note:
1. Please understand the product might have some colour difference due to different monitors and scenes.
2. Please allow slight deviation for the measurement data.
Package included:
1x Eachine EM3 Horizontal Gasoline Engine Model Stirling Water-cooled Cooling Structure