Home > FPV SYSTEMS > TRANSMITTER & RECEIVER

Eachine TX805S 5.8GHz 40CH 25/500/1000/1600mW AV FPV Transmitter VTX LED Display With Mic Heatsink Support OSD/Pitmode/Smart Audio for RC Drone Airplane Long Range - SMA

5.0 (Reviews 1)
US$23.90 US$0.00
US$23.90 US$0.00

Buy at

Banggood
Click here to download the manual: tx805s.pdf

Specification:
Input  voltage: 7V to 24V 
5V camera supply: 220mA(MAX)[email protected](Type)
5V camera supply: 470mA(MAX)[email protected](Type)
5V camera supply: 550mA(MAX)[email protected](Type)
5V camera supply: 830mA(MAX)[email protected](Type)
Extra features: Smart audio
Power supply: 5V output for Camera
Output power: 25mW/500mW/1000mW/1600mW switchable
Antenna connector: MMCX
Cable connector: Solder pads
Dimensions:  36mm*22mm*5mm,30.5 stackable hole
Weight: 11.3g(excluding antenna)

 
Button control Channel select mode
Channel select:
Select channels by simple short presses.
Blue LED light on stands for CH1,short presses to change 8 channels sequentially.
For CH2/3/4/5/6/7/8,Blue LED flicker once,it won't light on.
Notice:Blue LED only light on for CH1
 
Band select:
Press button for 2S,Red LED will flash,then short presses to select 5 bands.
 
Power select:
Press button for 4S,Red LED will flash,then select power by simple short presses to select 25mW/500mW/1000mW sequentially,
For 500mW, Green LED flicker once,it won't light on;For 1000mW Blue LED flicker once,it won't light on .Press the button again ,
Red LED,Green LED and Blue LED lights together,Represents the highest power 1600mW.
Notice:Red LED only light on for 25mW.
 
Pit Mode(0.01mW)
While in Pit Mode you can change channels and set power levels , but none of these changes will take effect until you quit Pit Mode.
By default ,Pit Mode will send a very weak signal.
 
Two ways to exit pit mode:
Press button 12S until all 16 LED turned off and light on again to exit pit mode,or you can exit pit mode via Betaflight OSD.
Notice:The VTX has memory for settings,To change the settings ,please repeat steps as above.
            
 
Features:
-Support Smart audio
-25mW/500mW/1000mW/1600mW power switchable
-One button frequency and power setup
-OSD configuration using smart audio
-Wide input Voltage with 5V for camera
-40 channels with MIC
-Solid MMCX Antenna connection and MMCX Brass Dipole Antenna

 
Package included:
1 x TX805S- 5.8GHz 40CH AV Transmitter VTX 
1 x pigtail
1 x Antenna
1 x Instructions

CUSTOMER REVIEWS

Average rating:
5.0 / 5.0
WRITE A REVIEW
  • 5.0
    By Timothy
    2019-07-28

    Timothy

    A great VTX once I managed to select the required power level and frequency. The instruction say PRESS button for x seconds where the value of x depends upon the facility required. I timed my presses precisely but to no avail. Lengthening the presses did eventually get to work properly. Very pleased with the VTX now.

RELATED PRODUCTS

WRITE A REVIEW

Rating:
Review Title * 0 /100

The review title can not be empty!

Review Content * 0 /800

The review content can not be empty!

Add Photo

    Max 2 images, 2MB per image, Format: jpeg/jpg/gif/png/bmp

    Add Video

    Share a video with your review, please make sure your video is related to the product

    SUBMIT REVIEWS

    Your review is submitted successfully!

    We will process your review within 1-5 business days.