Home > RC DRONES > FPV RACING DRONE

Eachine Tyro129 280mm F4 OSD DIY 7 Inch FPV Racing Drone PNP w/ GPS Caddx.us Turbo F2

0.0 (Reviews 0)
US$129.00 US$139.00
US$129.00 US$139.00

Buy at

Banggood

Eachine Tyro129 280mm F4 OSD DIY Version 7 Inch FPV Racing Drone PNP w/ GPS Caddx.us Turbo f2 Camera

Notice: 

1. This is the DIY version that comes unassembled.
2. Comes without battery, charger, receiver or radio transmitter.
3. The Go-pro Session Camera was not included in the package.

 


Specification: ( Manual)
Brand Name: Eachine
Model: Tyro129
Item Name: 280mm F4 OSD DIY Version 7 Inch FPV Racing Drone 
Version: PNP ( Without Receiver, Battery , Radio Transmitter)

Item Specification







280mm Racing Frame Kit

Wheel base: 280mm
Frame arm thickness: 5mm
Upper plate thickness: 2mm
Bottom Plate Thickness: 2mm 
Side plate thickness: 1.5mm
Frame kit material: 3K carbon fiber & CNC 6065 aluminium
 
2507 1800KV 3-5S Brushless Motor

KV: 1800KV
Lipo cell: 3-5S
Weight: 39g 
Motor Resistance: 0.0586Ω
Maximum pull: 1488g (4S 7inch propeller)
Maximum power: 840W
Configu-ration: 12N/14P
Motor Stator Diameter: 25mm
Motor Stator Thickness: 7mm
Motor Diameter: 30.8mm
Motor Length: 20mm
Whole shaft length: 35mm
Mounting holes distance: 16*16mm
Mounting holes: φM3
Recommend propeller: 6-7 inch
 
Eachine 4In1 40A BLHeli_S ESC

Continuous current: 40A
Burst current: 45A (10S)
BEC output: 5V @ 2A 
Input voltage: 2-6S
Main control chip: 48mhz EFM8BB2
Firmware upgrade: Supports Dshot150-600/Multishot/Oneshot/PWM
MOS: 5X6
Current Sensor: NO
Size: 37.5x37.5mm 
Mounting Hole: 30.5x30.5mm
Weight: 15g
Eachine GPS F4 Flight Controller
Brand Name: Eachine
Model: GPS F4 
Main control chip: STM32F405
Gyroscope: MPU6000
Barometer: BMP280
Firmware: Support betaflight / INAV firmware
Integrated OSD, support betaflight configuration & DMA Mode ( F4 MCU controls OSD)
- Support PPM /DSM2/X / IBUS/ SBUS/ XBUS receiver
- with 10V @ 1.2A BEC Output, for VTX or Camera
- LED_STRIP solder pin, changing LED flashing mode &  color via flight controller
- Buzzer solder pin, support connect external alarm buzzer
- with voltage detection port ( BAT) and current detection port ( CRT), to detect battery's voltage and current
     ( Need connect extra current sensor module) 
- with MicroSD Blackbox pad
- with 5 UART & I2C Port, for connecting GPS Module
- Plugs connector / Soldering Pads are Optional for all connector Port 
 
Caddx.us Turbo f2 Camera

Case size: 19x19x16mm
Weight: 5.5g
Signal system: NTSC / PAL (Switchable)
Resolution ratio(horizontal center): 1200TVL
Video output Signal: cvbs
Image: 16:9
Synchronization method: inter-sync
Camera lens: standard 2.1mm
Lens operating voltage: DC 4.5-40V
S/N Ratio:  >52dB (AGC OFF)
Audio: YES
 
5.8G 40CH 25/200/600mw switchable VTX
 
Transmitting power:0/25/200/600mW switchable 
Channel: 40CH
Full video format: NTSC/PAL
Input voltage: 7V~24V
Power dissipation: [email protected]/600MW
Transmitting Distance: ≥[email protected], ≥[email protected], ≥[email protected]
Size: 36×36×5mm
Weight: ≤7g (except antenna)
 
Eachine BN-220 GPS Module Brand Name: Eachine
Model: BN-220
Item Name: BN-220 GPS+GLONASS Dual GPS module
- Built-in FLASH, TTL 
Data Protocol:  NMEA-0183
Output Rate: 9600bps, 1HZ
Size: 22mm*20mm*6mm
1.TX LED:blue.The data output, TX LED flashing
2.PPS LED:red.PPS LED not bright when GPS not fixed,
   flashing when fixed
DALProp  T7056C 3-blade propeller

Brand Name: DALProp
Model: CYCLONE T7056C 
Material: PC
Mounting hole: 5mm
Quantity: 2 pairs
Color: Transparent White
Prop Spiral Diameter: 177.8mm
Hub Thickness: 8.26mm
Weight: 7.5g/ PC
Recommend Lipo Battery ( NOT Included) 5S 1600-2200mAh 50-85C Lipo Battery


Package Included:
1x Tyro129 DIY Drone PNP

CUSTOMER REVIEWS

Average rating:
0.0 / 5.0
WRITE A REVIEW

There are no reviews yet!

RELATED PRODUCTS

WRITE A REVIEW

Rating:
Review Title * 0 /100

The review title can not be empty!

Review Content * 0 /800

The review content can not be empty!

Add Photo

    Max 2 images, 2MB per image, Format: jpeg/jpg/gif/png/bmp

    Add Video

    Share a video with your review, please make sure your video is related to the product

    SUBMIT REVIEWS

    Your review is submitted successfully!

    We will process your review within 1-5 business days.