Home > RC DRONES > FPV RACING DRONE

Eachine Viswhoop 2.5 Inch 130mm 3-4S HD Cinewhoop FPV Racing Drone BNF Frsky D8/D16 DJI FPV Camera Caddx Vista

0.0 (Reviews 0)
US$249.00 US$0.00
US$249.00 US$0.00

Buy at

Banggood

Use code BGEAVWHOOP with 15% discount

 

 

Eachine Viswhoop 2.5 Inch 130mm 3-4S HD Cinewhoop FPV Racing Drone BNF Frsky D8/D16 DJI FPV Camera Caddx Vista


Specification:

Brand Name: Eachine
Item Name: Viswhoop 2.5 Inch 3-4S Cinewhoop
Wheelbase: 130mm
Size: 170mm*105mm*32mm
Weight: 124g (without battery)
Recommend Battery (Not Included) : 3S 650mah/750mah/850mah
                                                          4S 550mah/650mah/750mah/850mah

Features:
Light 2.5 Inch Caddx Vista Cinewhoop
Compatible both Frsky D8/D16 Radio transmitter and DJI FPV Radio transmitter

New design 1204 High efficiency brushless motors
Camera Angle adjustable
Smooth and powerful
Compatible both for 3s-4s Lipo/LIHV

Spare parts specifications:

Motor

Mode: EX1204
KV options: KV5000
Lipo cells: 3-4S
Configu-ration:9N12P
Stator Diamter:15mm
Stator Length:4mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len):Φ15mm*15mm
Weight(g):5.5g

Propellers

Brand Name: Gemfan
Model: Flash 2540
Item Name: 2540 2.5x4 Inch 3-Blade Propeller
Material: PC
Center Mounting Hole: 1.5mm
Hub Thickness: 5mm
Blade Wideth: 9.9mm
Quantity: 4 Pairs
Weight: 0.98g
Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 8V-17V)
Built-in 12A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky D8/D16 SPI receiver
Built-in 2.4G Power Amplification
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Built-in 5V 1.5A BEC
Built-in voltage detection
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 12A continuous peak 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_7.HEX
Default protocol: DSHOT600
Internal Frsky D8/16 receiver Version SPI BUS receiver
Frsky D8/D16 compatible
Compatible Non EU or EU-LBT transmitter both D8 mode and D16 mode
Channels: 8ch/16ch
Dual antenna
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 400m
DJI FPV Camera Sensor: 1/3.2'' CMOS
Effective Pixels: 4M
Lens: 2.1mm,f/2.1
Shutter: Rolling shutter
ISO: 100-25600
FOV: 150° (D);122° (H);93° (V)

Caddx Vista

Brand Name: Caddx
Item Name: Vista Kit
Operating Frequency: 5.725-5.850GHz
Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
Min. Latency (end-to-end): Low Latency Mode(720p 120fps): 21-28ms, High Quality Mode(720p 60fps): 30-40ms
Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
I/O Interface: USB-C,IPEX,3-in-1 Port,microSD card slot
Supported Flight Control System: F3,F4,F7
Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
Input Power: 7.4-26.4V



Package Includes:
1 x 130mm Frame Kit
1 x Toothpick F4 Flight Controller
4 x NC1204 KV5000 3-4S Motor
8 x Gemfan 2540 3-blade Propellers (4x CW, 4x CCW)
1 x Caddx Vista VTX
1 x DJI FPV Camera
1 x 2.5 Inch Propeller Guard

Wholesale

Wholesale Inquiry

CUSTOMER REVIEWS

Average rating:
0.0 / 5.0
WRITE A REVIEW

There are no reviews yet!

RELATED PRODUCTS

WRITE A REVIEW

Rating:
Review Title * 0 /100

The review title can not be empty!

Review Content * 0 /800

The review content can not be empty!

Add Photo

    Max 2 images, 2MB per image, Format: jpeg/jpg/gif/png/bmp

    Add Video

    Share a video with your review, please make sure your video is related to the product

    SUBMIT REVIEWS

    Your review is submitted successfully!

    We will process your review within 1-5 business days.

    Please enter your inquiry information

    • *
    • *
    • 0 / 300
    • Please enter your contact information
    • *
    • *
    • Submit

    Reminder

    OK