Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 2206 2300KV 800TVL CCD ARF

Eachine Wizard X220S Omnibus F4 5.8G 72CH VTX 30A BLheli_S Dshot600 ESC 800TVL Camera With 30° Runcam3/Gopro Session Camera Mount

















Description:

Item	Specification
Eachine Wizard  X220S	Wheelbase: 220mm Frame arm: 4mm light material  Weight: 356g (without battery and camera mount) Take off weight: 561g Use light composite material. 4mm thickness and 15mm width frame arms, the width is 5mm less than Eachine Wizard X220. Frame kit with camera angle scale and 30° camera mount for Runcam 3 Gopro session.  Anti-vibration sponges to protect the racer frome crashing.
Eachine  MN2206 2300KV motor	KV: 2300 Max thrust: 1100G Length: 35MM NO.OF cell: 3-5S Diameter: 28MM Framework: 12N14P Shaft: 3MM Propeller: 5 inch Weight: 28g
Eachine 30A BLHELI_S  4 in 1 ESC	Con. current: 30A Peak current (10S): 35A Input  voltage: 2-5S BEC: No Programming: YES Firmware: blheli_s Weight: 28g Size: 36*36MM
Eachine 1179 800TVL CCD camera	Color: purple Sensor: CCD Resolution(horizontal center): 800TVL Shell size: 25mm*25mm Weight: 11g Resolution: PAL: 1980H×1080 (2MP) NTSC: 1980H×1080V (2MP) Format: PAL/NTSC switchable  Video output: 1.0Vp-p/75Ω Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB. AWB: ON/OFF Exposure mode: electron exposure Electronic shutter: 1/50(1/60) - 1/100000 S Gamma correction: 0.45/1.0 Synchronization method: internal synchronization Lens: standard 2.8mm lens  Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V) Workig current: 70mA (low power consumption) Workig temperature: -20℃--60℃ Humidity: 0%~98%  Strong backlighting effect
5.8G 72CH 25MW 200mw 600MW switchable transmitter	Video Format  : NTSC/PAL Channel: 72CH Operating Temperature : -10~85℃ Connector: SMA Female (Inner hole) Antenna Connector:  RP-SMA male (Inner needle)
BF3.1.5 Omnibus F4 V2 flight controller	Size: 35x35mm Mounting hole: 30.5x30.5mm Firmware: betaflight_3.1.5_OMNIBUSF4SD Input voltage: 2-6S SCM: STM32 F405 MCU Sensor: SPI Sensor MPU6000 Berometer: BMP280 Slot: standard SD card slot  BEC: 5V/3A STM32 F405 MCU, Runs betaflight_3.1.5_OMNIBUSF4SD, could run faster loop time.  Using F4 MCU controls OSD over SPI bus in DMA mode. OSD Configation has been included in Betaflight GUI.  Built-in 5V/3A BEC. Built-in galvanometer. With LC filter.
Eachine 5051 3-blade propeller	Color: purple Quantity: 10 Pairs Mounting Hole: 5mm

This is the ARF version that comes without battery, charger, receiver and remote control.

Package included: