Home >

Eachine 700TVL 1/3 Cmos FPV 148 Degree Camera w/32CH Transmission

5.0 (Reviews 106)
US$31.99 US$44.99
US$31.99 US$44.99

Buy at


Eachine 700TVL 1/3 Cmos FPV 148 Degree Camera w/32CH Transmission

Brand Name: Eachine
Item Name: 700TVL 148 degree Camera module with transmitter
Specification of camera:
Type:PAL / NTSC (free switch, please note that you need to turn off the electricity before switching or it may be failed.)  
Power Supply: 3.6-5.5V (powered by image transmission)
Power consumption: [email protected]
Sensor: 1/3” CMOS
Resolution: 700TVL
FOV: 160°
Lens: 2.6mm IR coated
Operating temperature: -20°C - 70°C
Camera Size: 32 x 32 x 23.5mm
Lens Size(Length x Diameter): 15.3mm x 14mm
Weight: 12g
Usage: Compatible with general 5.8G transmitter
160°FOV diagonal, 148°horizontal view angle (ideal for fixed camera)
Debuged for FPV fly
Specification of image transmission:
Item NO.: LT200
Modulation mode: FM
Supported video format: NTSC/PAL
Output impedance: 75 Ohm
Output signal Strength: 23~24dBm.
Output power: 200mW
Operating channel: 32CH
Operating voltage: 7V - 24V
Operating current: 190mA
Operating temperature: -10~85
Sound carrier: 6.5MHz
Antenna connector: RP-SMA male
Size: 38mm x 22.5mm x 6mm
Weight: 6g(without antenna)
Video band width: 0~8.0 MHz
Video input level: 0.8~1.2 Vp-p
Video input impedance: 75 Ohm
Audio input level: 0.5~2.0 Vp-p
Audio input impedance: 10K Ohm
Transmitter frequency: 5645-5945MHz with 200mW power output
Transmitting distance > ~1500m (open area)
Note: This Eachine 700TVL 1/3 Cmos FPV 148 Degree Camera supports 11.1V and the 32CH Transmission supports 7V - 24V.  After testing, both of them in 11.1V will be the best if used as a set. 
Frequency Table
Frequency Band A 5865 5845 5825 5805 5785 5765 5745 5725
Frequency Band B 5733 5752 5771 5790 5809 5828 5847 5866
Frequency Band E 5707 5685 5665 5645 5885 5905 5925 5945
Frequency Band F 5740 5760 5780 5800 5820 5840 5860 5880
With 1/3'' CMOS sensor
With lens cap, well protecting the lens.
Performance rivals CCD. Nice quality low cost. 
Evening low light performance as excellent as highlight during the day.
Imaging parameters and the wide angle rigorous debugging for FPV.
Special cable connected the camera to image transmission, very convenient and concise.
Super lightweight, ultra-low power consumption, suitable for RC multicopter.
Can be mounted on frame, compatible with most of the 250mm frame.
Image settings have been FPV tuned through hours of flight testing to ensure great performance in challenging lighting conditions (no problem to fly in low afternoon sunlight). 
Low power and light weight make this camera a perfect choice for smaller aircraft. Come with tiny 200mW 32ch FPV professional video transmitters.
Compatible with ImmersionRC Boscam, Foxtech and other generic brand FPV receivers within the same frequency range.
Package Included:
1 x Eachine 700TVL 148°camera
1 x 5.8G image transmission 
1 x Antenna(2db)
1 x 5P Cable
1 x Manual


Wholesale Inquiry


Average rating:
5.0 / 5.0
  • 5.0
    By Drew

    Ironically the guy who recommended this to me has since switched to something fancier

    I had a lot of problems with video before I switched to using these. I recently built a new quad with all expensive racing parts, but I stuck with this VTX, because I've never had a single problem with it. Ironically the guy who recommended this to me has since switched to something fancier. Now he's having video issues sometimes, and I'm still going strong with the trusty VTX03.

  • 5.0
    By bob

    Ventilation important. Works well.

    Eachine VTX03. Runs HOT even at 25mw. No issues with video so far. Original BabyHawk, Rakonheli mount with Micro Swift 2. Through holes in board aren't big enough to fit RunCam wires so I had to splice them together. Not a deal breaker.

  • 5.0
    By Paul Uzzi

    Great buy

    I love this little vtx. I hit glue it to the back of a Run Cam micro camera on an Emax Babyhawk. Easy to change channels and antenna is replaceable.

  • 5.0
    By Leon

    Five Stars


  • 5.0
    By Jollywombat

    Slapped this into a custom micro quad vs the standard ...

    Slapped this into a custom micro quad vs the standard 25mw TX's. Well worth the extra few grams of weight.

Load More



Review Title * 0 /100

The review title can not be empty!

Review Content * 0 /800

The review content can not be empty!

Add Photo

    Max 2 images, 2MB per image, Format: jpeg/jpg/gif/png/bmp

    Add Video

    Share a video with your review, please make sure your video is related to the product


    Your review is submitted successfully!

    We will process your review within 1-5 business days.

    Please enter your inquiry information

    • *
    • *
    • 0 / 300
    • Please enter your contact information
    • *
    • *
    • Submit