Home > RC DRONES > FPV RACING DRONE

Eachine US65 DE65 PRO 65mm 1-2S Brushless Whoop FPV Racing Drone BNF CrazybeeX F4 FC CADDX ANT Cam 0802 14000KV Motor - US65 Pro Compatible Frsky Receiver

0.0 (Reviews 0)
US$106.00 US$106.00
US$106.00 US$106.00

Buy at

Banggood

Note: The first 200pcs whoop will ship with GNB27 2.0 plug.  It will be exchanged to ET2.0 plug after sending the first 200pcs.

 

Eachine US65 DE65 PRO 65mm 1-2S Brushless Whoop FPV Racing Drone BNF CrazybeeX F4 FC CADDX ANT Cam 0802 14000KV Motor

 

Eachine US65 / DE65 PRO whoop comes with watertransfer craft and a New AIO 4 IN 1 CrazybeeX flight controller. The weight only 24g. High performance 2.0 plug design supporting up to 2S Lipo and 5A continuous current for each ESC. Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera give you a highly view.  Simply bind it to your transmitter then you are ready to enjoy your all-new Eachine US65 / DE65 PRO.

 

Specifications:

Brand Name: Eachine
Item Name: US65PRO DE65PRO

Wheelbase: 65mm
Size: 81mmx81mmx39mm
Weight: 24g(without battery)

 

Features:

24gram 1-2s brushless 65mm whoop

New AIO 4in1 CrazybeeX flight controller

Smooth and powerful

CADDX ANT Camera

High performance ET2.0 plug

 

Receiver option:

Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)

Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)

External Frsky RXSR receiver version(ACCST D16 sbus output)

External TBS Crossfire Nano receiver version

 

Flight controller

(Frsky SPI RX version) CRAZYBEEX FR V1.0 FC  Firmware target: CrazybeeF4FR

(Flysky SPI RX version) CRAZYBEEX FS V1.0 FC Firmware target: CrazybeeF4FS

(External Frsky RXSR version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX

(External TBS CRSF NANO version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver or no receiver
Built-in 5V 1A BEC
Built-in voltage detection

Motor

Mode: NX0802 14000KV
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1-2S

Onboard 4in1 ESC

 MCU upgraded to EFM8BB21

Power supply: 1S LiPo/LiPo HV

Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HE*
Default protocol: DSHOT600

Propellers

Gemfan 1219-3

Center Thickness:5mm

Prop Disk Diameter:31mm

Center Hole Inner diameter:1.0mm

Onboard 5.8g VTX

Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 

Smartaudio ready

Caddx ANT 1200tvl camera

Image Sensor: 1/3" CMOS Sensor

Horizontal Resolution: 1200 TVL

TV System: NTSC or PAL 

IMAGE: 16:9 or 4:3

Synchronization: Internal

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min. Illumination: [email protected]

Auto Gain Control: YES

BLC: YES

WDR: Global WDR

DNR: 3D DNR

Dimensions: 14*14mm(with bracket to 19*19mm)

Wide Power Input: DC 3.7-18V

Work Temperature: -20℃~+60℃

Weight: 2g (N.W.)

Lipo Battery

Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 55mmx12mmx7mm
Weight: 6.5g

Connector: ET2.0

Multi port Lipo/Lihv battery charger

Weight: 41g
Dimensions: 82x51x22mm
Input: DC 7V-22V
Output switchable: Fixed at 200~600 milliamps
Cutoff voltage switchable:
4.20v cell charging cutoff (+- 0.5% margin of error) for 1S Lipo Battery
4.35v cell charging cutoff (+- 0.5% margin of error) for 1S 3.8V LIHV Battery

Onboard Frsky SPI receiver Version

Onboard Frsky SPI D8 receiver Version

SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model

Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard Flysky SPI receiver Version

SPI BUS receiver

Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support

External Frsky R-XSR receiver version

Weight: 1.5g

Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)

Operating Voltage Range: 3.5V~10V

Operating Current:[email protected]

Firmware Upgradable

Compatibility: FrSky X Series modules and radios in D16 mode 

Could support Frsky New ACCESS Protocol ( Upgrade firmware)

External TBS CRSF Nano receiver version

Original TBS CROSSFIRE Receiver  ,CRSF Protocol , Official TBS transmitter compatible

 

Package Included:

1 x US65 PRO or DE65 PRO Whoop Frame and canopy

1 x Receiver

Option1: CrazybeeX FR V1.0 built-in internal Frsky SPI D8/D16 receiver

Option2: CrazybeeX FS V1.0 built-in internal Flysky SPI receiver

Option3:CrazybeeX PNP V1.0 with External Frsky RXSR receiver

Option4:CrazybeeX PNP V1.0 with External TBS crossfire nano receiver

4 x Eachine NX0802 KV14000 brushless motor

1 x Gemfan 1219-3 Propellers(4cw+4ccw)

1 x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera

1 x 5.8G 25mw 40ch vtx (Flight controller built-in)

4 x 1S 250mah 30C LiHV Battery

1 x Multi port LIPO/LIHV Battery Charger with 12V adapter

1 x Screw Driver

1 x Propeller disassemble tool

1 x Eachine Handbag

 

CUSTOMER REVIEWS

Average rating:
0.0 / 5.0
WRITE A REVIEW

There are no reviews yet!

RELATED PRODUCTS

WRITE A REVIEW

Rating:
Review Title * 0 /100

The review title can not be empty!

Review Content * 0 /800

The review content can not be empty!

Add Photo

    Max 2 images, 2MB per image, Format: jpeg/jpg/gif/png/bmp

    Add Video

    Share a video with your review, please make sure your video is related to the product

    SUBMIT REVIEWS

    Your review is submitted successfully!

    We will process your review within 1-5 business days.